View ESD102-U1-02ELS_8676397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

power management & multimarket data sheet revision 1.2, 2015-12-14 final ESD102-U1-02ELS uni-directional, 3.3 v, 0.4 pf, 0201, rohs ESD102-U1-02ELS protection devices tvs (transient voltage suppressor)
edition 2015-12-14 published by infineon technologies ag 81726 munich, germany ? 2015 infineon technologies ag all rights reserved. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office ( www.infineon.com ) warnings due to technical requirements, components may contain dangerous substances. for in formation on the types in question, please contact the neares t infineon technologies office. infineon technologies components may be used in life-suppo rt devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or sys tem. life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. if t hey fail, it is reasonable to assume that the health of the user or other persons may be endangered.
ESD102-U1-02ELS product overview final data sheet 3 revision 1.2, 2015-12-14 1 product overview 1.1 features ? esd / transient protection of high speed data lines according to: ? iec61000-4-2 (esd): 20 kv (air / contact) ? iec61000-4-4 (eft): 2.5 kv / 50 a (5/50 ns) ? iec61000-4-5 (surge): 3 a (8/20 s) ? uni-directional working voltage: v rwm = 3.3 v ? ultra low capacitance: c l = 0.4 pf (typical) ? very low clamping voltage: v cl = 8 v (typical) at i pp = 16 a ? low reverse current: i r = 1 na (typical) ? very low dynamic resistance: r dyn = 0.19 ? (typical) ? pb-free (rohs compliant) and halogen free package, very small form factor 0.62 x 0.32 x 0.31 mm 3 1.2 application examples ? usb 3.0, 10/100/1000 ethernet, fire wire, dvi, hdmi, s-ata, displayport ? mobile hdmi link, mddi, mipi, swp / nfc 1.3 product description figure 1 pin configurati on and schematic diagram table 1 part information type package configuration marking code ESD102-U1-02ELS tsslp-2-3 1 line, uni-directional f a) pin configuration pg-ts(s)lp-2_single_diode_pinconf_and_schematicdiag.vsd b) schematic diagram pin 1 pin 2 pin 1 pin 2 pin 1 marking (lasered)
ESD102-U1-02ELS maximum ratings final data sheet 4 revision 1.2, 2015-12-14 2 maximum ratings attention: stresses above the max. values listed here may cause permanent damage to the device. exposure to absolute maximum rating conditions for extended periods may affect device reliability. maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. 3 electrical characteristics at t a = 25 c, unless otherwise specified figure 2 definitions of electrical characteristics table 2 maximum rating at t a = 25 c, unless otherwise specified parameter symbol values unit esd air discharge 1) esd contact discharge 1) 1) v esd according to iec61000-4-2 v esd 20 20 kv peak pulse current 2) 2) stress pulse: 8/20 s current waveform according to iec61000-4-5 i pp 3 a operating temperature t op -55 to 125 c storage temperature t stg -65 to 150 c

!"#!!"#"!" $%&"' !(!! ) *!! +!
! &! *,

&$

&$ # # #*$! #

ESD102-U1-02ELS electrical characteristics at t a = 25 c, unless otherwise specified final data sheet 5 revision 1.2, 2015-12-14 table 3 dc characteristics at t a = 25 c, unless otherwise specified parameter symbol values unit note / test condition min. typ. max. reverse working voltage v rwm ? ? 3.3 v pin 1 to pin 2 trigger voltage v t1 ?6.2? holding voltage v h 3.35 4 4.4 pin 1 to pin 2, i r = 10 ma reverse current i r ?150na v r = 3.3 v, from pin 1 to pin 2 table 4 ac characteristics at t a = 25 c, unless otherwise specified parameter symbol values unit note / test condition min. typ. max. line capacitance c l ? 0.4 0.65 pf v r = 0 v, f = 1 mhz ? 0.4 0.65 pf v r = 0 v, f = 1 ghz series inductance l s ?0.2?nh table 5 esd and surge characteristics at t a = 25 c, unless otherwise specified parameter symbol values unit note / test condition min. typ. max. clamping voltage 1) 1) please refer to application note an210 [1] . tlp parameter: z 0 = 50 , t p = 100ns, t r = 0.6 ns. v cl ?8?v i tlp = 16 a, t p = 100 ns, from pin 1 to pin 2 ?11? i tlp = 30a, t p = 100 ns from pin 1 to pin 2 forward clamping voltage 1) v fc ?6? i tlp = 16 a, t p = 100 ns, from pin 2 to pin 1 ?9? i tlp = 30 a, t p = 100 ns, from pin 2 to pin 1 dynamic resistance 1) r dyn ?0.19? t p = 100 ns from pin 1 to pin 2 ?0.23? t p = 100 ns from pin 2 to pin 1
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 6 revision 1.2, 2015-12-14 4 typical characteristics at t a =25c, unless otherwise specified figure 3 reverse leakage current, i r = ( v r ) figure 4 reverse current i r = f ( t a ), v r = 3.3 v 10 -12 10 -11 10 -10 10 -9 10 -8 10 -7 0 1 2 3 4 i r [a] v r [v] 10 -9 10 -8 10 -7 10 -6 25 50 75 100 125 150 i r [a] t a [ c]
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 7 revision 1.2, 2015-12-14 figure 5 forward current, i f = ( v f ) figure 6 line capacitance c l = f ( v r ), f = 1mhz, from pin 1 to pin 2 10 -9 10 -8 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 i f [a] v f [v] 0.2 0.4 0.6 0.8 0 0.5 1 1.5 2 2.5 3 3.5 c l [pf] v r [v]
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 8 revision 1.2, 2015-12-14 figure 7 clamping voltage (esd): v cl = f ( t ), 8 kv positive pulse from pin 1 to pin 2 figure 8 clamping voltage (esd): v cl = f ( t ), 8 kv negative pulse from pin 1 to pin 2 -20 0 20 40 60 80 -100 0 100 200 300 400 500 600 700 800 900 v cl [v] t p [ns] scope: 6 ghz, 20 gs/s v cl-max-peak = 81 [v] v cl-30ns-peak = 7 [v] -80 -60 -40 -20 0 20 -100 0 100 200 300 400 500 600 700 800 900 v cl [v] t p [ns] scope: 6 ghz, 20 gs/s v cl-max-peak = -72 [v] v cl-30ns-peak = -3 [v]
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 9 revision 1.2, 2015-12-14 figure 9 clamping voltage (esd): v cl = f ( t ), 15 kv positive pulse from pin 1 to pin 2 figure 10 clamping voltage (esd): v cl = f ( t ), 15 kv negative pulse from pin 1 to pin 2 -20 0 20 40 60 80 100 -100 0 100 200 300 400 500 600 700 800 900 v cl [v] t p [ns] scope: 6 ghz, 20 gs/s v cl-max-peak = 104 [v] v cl-30ns-peak = 9 [v] -100 -80 -60 -40 -20 0 20 -100 0 100 200 300 400 500 600 700 800 900 v cl [v] t p [ns] scope: 6 ghz, 20 gs/s v cl-max-peak = -98 [v] v cl-30ns-peak = -7 [v]
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 10 revision 1.2, 2015-12-14 figure 11 clamping voltage (tlp): i tlp = f ( v tlp ) [1] , pin 1 to pin 2 -50 -40 -30 -20 -10 0 10 20 30 40 50 -20 -10 0 10 20 -20 -15 -10 -5 0 5 10 15 20 i tlp [a] equivalent v iec [kv] v tlp [v] ESD102-U1-02ELS r dyn r dyn = 0.19 r dyn = 0.23
ESD102-U1-02ELS typical characteristics at t a =25c, unless ot herwise specified final data sheet 11 revision 1.2, 2015-12-14 figure 12 insertion loss vs. frequency in a 50 ? system -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 10 -2 0.1 1 10 insertion loss ( | s 21 | ) [db] frequency [ghz] esd102-b1-02els
ESD102-U1-02ELS application information final data sheet 12 revision 1.2, 2015-12-14 5 application information figure 13 single line, uni-directional esd / transient protection [2] application_ESD102-U1-02ELS.vsd
ESD102-U1-02ELS package information final data sheet 13 revision 1.2, 2015-12-14 6 package information 6.1 tsslp-2-3 figure 14 tsslp-2-3 package outline (dimension in mm) figure 15 tsslp-2-3 footprint (dimension in mm) figure 16 tsslp-2-3 packing (dimension in mm) figure 17 tsslp-2-3 marking example table 1 ?part information? on page 3 tsslp-2-3, -4-po v01 0.05 0.32 1 2 0.035 0.2 1) 0.62 0.05 +0.01 0.31 -0.02 1) dimension applies to plated terminals pin 1 marking 1) 0.035 0.26 0.05 max. bottom view top view 0.355 0.27 0.19 0.19 0.19 copper solder mask stencil apertures 0.57 0.24 0.62 0.32 0.24 0.14 tsslp-2-1,-2-fp v02 ex 4 ey 0.35 pin 1 marking 8 tsslp-2-3, -4-tp v03 deliveries can be both tape types (no selection possible). specification allows identical processing (pick & place) by users. ex ey punched tape tape type embossed tape 0.43 0.73 0.37 0.67 tsslp- 2 - 3 , -4 -mk v 01 pin 1 marking 1 type code
ESD102-U1-02ELS references final data sheet 14 revision 1.2, 2015-12-14 references [1] on-chip esd protection for integrated circ uits, albert z. h. wa ng, isbn:0-7923-7647-1 [2] infineon ag - application note an210: effective esd protection design at system level using vf-tlp characterization methodology [3] infineon ag - recommendations for pcb a ssembly of infineon tslp and tsslp package
ESD102-U1-02ELS final data sheet 15 revision 1.2, 2015-12-14 trademarks of infineon technologies ag aurix?, bluemoon?, comneon? , c166?, crossave?, canpak?, ci pos?, coolmos?, coolset?, corecontrol?, dave?, easypim?, econobridg e?, econodual?, eco nopack?, econopim?, eicedriver?, eupec?, fcos?, hitfet?, hybridpack?, isofac e?, i2rf?, isopack?, mipaq?, modstack?, my-d?, novalithic?, omnitune?, optimos?, origa?, profet?, pro-sil?, primarion?, primepack? , rasic?, reversave?, satric?, sieget?, sindr ion?, smarti?, smartlewis?, tempfet?, thin q!?, tricore?, trenchstop?, x-gold?, xmm?, x-pmu?, xposys?. other trademarks advance design system? (ads) of agilent tech nologies, amba?, arm?, mu lti-ice?, primecell?, realview?, thumb? of arm limited, uk. autosar? is licensed by autosar development partnership. bluetooth? of bluetooth sig inc. cat-iq? of dect forum. colossus? , firstgps? of trimble navigation ltd. emv? of emvco, llc (visa holdings inc.). ep cos? of epcos ag. flexgo? of microsoft corporation. flexray? is licensed by flexra y consortium. hyperterminal? of hilgraeve incorpor ated. iec? of commission electrotechnique internationale. irda? of infrared data association corporation. iso? of international organization for standardizati on. matlab? of mathworks, inc. maxim? of maxim integrated products, inc. mi crotec?, nucleus? of mentor graphi cs corporation. mifare? of nxp. mipi? of mipi alliance, inc. mips? of mips technologies, inc., usa. murata? of murata manufacturing co., microwave office? (mwo) of applied wave research inc., omnivision? of omnivision technologies, inc. openwave? openwave systems inc. red hat? red hat, inc. rfmd? rf micro devices, inc. sirius? of si rius sattelite radio inc. solaris? of sun microsystems, inc. spansion? of spansion llc ltd. symbian? of symbian software limited. taiyo yuden? of taiyo yuden co. teaklite? of ceva, inc. tektro nix? of tektronix inc. toko? of toko kabushiki kaisha ta. unix? of x/open company limited. verilo g?, palladium? of cadence design systems, inc. vlynq? of texas instruments incorpor ated. vxworks?, wind river? of wind ri ver systems, inc. zetex? of diodes zetex limited. last trademarks update 2010-06-09 revision history: re vision 1.1, 2014-02-13 page or item subjects (major changes since previous revision) revision 1.2, 2015-12-14 all layout change
published by infineon technologies ag www.infineon.com

▲Up To Search▲

Price & Availability of ESD102-U1-02ELS

	To Download ESD102-U1-02ELS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .